Be careful to avoid touching those components with your bare hands. Auto Tray Switch Distribute one pack of developer [A] evenly across the width of the development unit, into all openings. Reinstall the 1st tray and rear cover. Scanner gamma correction 4.
|Date Added:||7 August 2008|
|File Size:||52.59 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
B DF Feed Motor Displays the total number of prints total.
But note that regardless of the setting, the motor will switch off when the machine enters energy saver mode. The Cover Open indicator is lit even if the vertical transport door is closed. Front long cover [C]! The higher the temperature or humidity is the higher the applied voltage required.
toner cartridge 1220 for ricoh npg1505/1805/1805D/1508/1808/1808D/1502/1802
Initialize the TD sensor SP Install the two screws [A]. Left exhaust fan [F]! This SP setting specifies the offset from this base value. Black Line Erase In ADF mode, if extremely low CCD output is detected on the scanning line before the leading edge of original arrives there, this is attributed 180d5 abnormal black dots on the exposure glass.
The toner density sensor [B] is taped to the bottom of the PCU.
However white lines are minimized. If they are not, adjust the side-to-side and leading edge registrations. Pull out the charge roller [D] and cleaning brush [E] as a single assembly together with the plastic end pieces and springs. Displays the total amount of copier memory installed. The toner supply motor on time for each value of SP is as follows. Turn the main power switch on. Other OHP sheet sizes may cause a paper jam. Open the front door and remove the toner bottle holder [A].
Nashuatec Downloads – D
Vertical Transport Sensor The IMB should never be taken off the bracket. The image moves toward the leading edge.
SP applies the correction only to the output from the central CCD elements only, keeping the output from the edge elements constant as the 105d.
The toner supply mechanism transports toner from the bottle to the development unit. Scanner home position error 4 The scanner home position sensor does not detect the on condition after the scanner returns to the home position.
Additional front space is required to allow operators to stand at the aifcio of the machine. Therefore, the original background will not appear on copies.
Clean as necessary with a blower brush, etc. Select the required copy features such as paper size, image density, and reproduction ratio.
Toner Ricoh 1505/1805/1805d/1508/1808/1808D/1502/1802/1802d 888514 Original Black
WMF Display if writing has failed. Remove the A R DF or platen cover.
B DF Drive Board Do not touch the toner shield glass or the surface of the polygonal mirror with bare hands. The machine mixes the developer for 2 minutes while reading and displaying the Vt value.